Alkaline burn injury mechanism is the alkali of water absorption, Potassium Humate so that local cell dehydration, alkali and tissue protein to form alkali - denatured protein complex, saponified adipose tissue, saponification of the heat can cause deep tissue to continue to damage. Potassium Humate Since the alkali-denatured protein complex is soluble, the alkali ions can be further penetrated into the deep tissue, causing damage.
Caustic burns are usually deep in the depth of more than two degrees, stinging violent. Dissolution of the wound to continue to deepen the wound, scab soft,Potassium Humate was sticky slip "soap-like" or "rotten tofu" -like changes, easy to complicated after infection wound sepsis. Nail contact with caustic alkali will become thinner, loss of luster, so that nail flat and even spoon. Potassium Humate Thin solution can make the skin dry, chapped, molting. Caustic steam on the eye and upper respiratory tract irritation strong, can cause eye and upper respiratory tract burns.
1, used as a desiccant, absorbent, Potassium Humate for the production of oxalic acid and a variety of potassium, but also for electroplating, sculpture, lithography and so on.
2, mainly used for the production of raw materials such as potassium, such as potassium permanganate, potassium carbonate and so on. In the pharmaceutical industry, Potassium Humate for the production of potassium boron, spironolactone, heparanol, testosterone propionate and so on. In the light industry for the production of potassium soap, alkaline batteries, cosmetics (such as cold cream, cream and shampoo). Potassium Humate In the dye industry, for the production of reducing dyes, such as the reduction of blue RSN and so on. In the electrochemical industry, for electroplating, sculpture and so on. In the textile industry, for printing and dyeing, bleaching and mercerizing, and a large number of used for the manufacture of man-made fibers, polyester fiber main raw materials. In addition, Potassium Humate it is also used for metallurgical heaters and leather degreasing and so on.
3, chemical raw materials, for medicine, household chemicals and so on.
4, used as analytical reagents, saponification reagents, Potassium Humate carbon dioxide and moisture absorber.
5, the chemical industry for the manufacture of washing soap, shampoo soap, cream, cream, Potassium Humate cream, shampoo and other raw materials. The pharmaceutical industry for the manufacture of progesterone, vanillin and other raw materials. The dye industry is used to make melamine dyes. The battery industry is used to make alkaline batteries
The organization has a burning effect, can dissolve the protein, the formation of alkaline denatured protein. Solution or dust splashed on the skin, especially splashed into the mucosa, can produce soft scab. The higher the solution concentration, the higher the temperature, the stronger the effect. Potassium Humate Splashed into the eye, not only can damage the cornea, but also make the eye deep tissue damage.
The maximum allowable concentration is 0.5 mg / m. Work should be prevented from touching the skin and eyes, such as accidentally touch, you can use water to wash damaged parts, Potassium Humate and then wet with 5% acetic acid, tartaric acid, hydrochloric acid or citric acid solution; such as splashing the eyes, the application of water or saline carefully Slow wash 10 ~ 30 min, and then click on 2% of the carnivacaine or 0.5% of the cardaine solution. Operation should be worn by the sturdy cloth made of uniforms, Potassium Humate wearing rubber gloves, cuffs, aprons, wearing shoes and other labor insurance products, hands should be coated with neutral and hydrophobic ointment.